nVent CADDY Cable Support to Stud, Clip-On, 14/2 to 12/3 AWG MC/AC/NM Cable Conduit/Cable, Specifications: 7/16 to 9/16 in OD, Spring Steel, Caddy® Armor

nVent CADDY Support Clip, Independent, 15/16 in, 65 lb Holding, 1/4 in Dia x 9/16 in L Screw, 1/16 in THK Flange, Steel, Caddy® Armor

nVent CADDY Cable/Conduit Clip, 0.472 in Outside Dia, 14/2 to 12/3 AWG Wire, 3 to 5 mm THK Flange, Surface Mount, For Use With: 14/2 to 12/3 AWG MC/AC Cable, EMT, Rigid, ENT, IMT and Aluminum Conduit, Steel, Caddy® Armor/Zinc Phosphate. Box of 100

nVent CADDY K12 Cable/Conduit Clip, 1/2 in, 3/4 in Conduit, 15/50/100 lb Load, 0.945 in OD, 8 AWG, 9 AWG, 10 AWG, 12 AWG Wire, Steel. Box of 100.

nVent CADDY K16 Cable/Conduit Clip, 3/4 in, 1/2 in, 1 in Conduit, 15/50/100 lb Load, 1.181 in OD, 8 AWG, 9 AWG Wire, Spring Steel/Steel

nVent CADDY K8 Cable/Conduit Clip, 1/2 in Conduit, 15/50/100 lb Load, 0.709 in OD, 8 AWG, 9 AWG, 10 AWG, 12 AWG Wire, Steel. Box of 100

nVent CADDY MC/AC Cable to Stud Clip, Series: MAC2, For Use With: 14/2 to 10/3 AWG MC/AC Cable, 1/8 in THK Flange, Stud Mount, Spring Steel, Caddy® Armor. Box of 100

nVent CADDY MCS100 MC/AC Cable Support Bracket, Steel, Electro-Galvanized

nVent CADDY MCS101 MC/AC Cable Support Bracket, Steel, Electro-Galvanized

nVent CADDY Mounting Plate, Flush Mount, For Use With: Low Voltage Class 2 Outlet, 1-Gang, 1/2 to 1-1/4 in THK Drywall, 0.15 in/0.187 in Hole, Steel, Plain, 2-1/2 in W x 4-1/4 in H

nVent CADDY Mounting Plate, Flush Mount, For Use with: Low Voltage Class 2 Outlet, 2-Gang, 1/2 to 1-1/4 in THK Drywall, 0.15 in/0.187 in Hole, Steel, Plain, 4-1/4 in W x 4-1/4 in H

nVent CADDY Mounting Plate, Series: MP Series, Flush Mount, For Use With: Low Voltage Class 2 Outlet, 1-Gang, 1/4 to 1-1/4 in THK Drywall, ABS, Plain

nVent CADDY Mounting Plate, Flush Mount, For Use With: Low Voltage Class 2 Outlet, 1-Gang, 1/2 to 5/8 in THK Drywall, 0.156 in/0.187 in Hole, Steel, Plain/Pre-Galvanized, 4 in W x 4-1/2 in H

nVent CADDY Mounting Plate, Nail-On Mounting, For Use With: Low Voltage Class 2 Outlet, Specifications: 2-Gang, 1/2 to 5/8 in THK Drywall, 0.156 in/0.187 in Hole, Steel, Plain/Pre-Galvanized, 4.5 in H x 5.8 in W Dimensions

nVent CADDY Box Support, Snap-On, Stud Mount, For Use With: Stud Mounted Box, Square Box, Spring Steel, Caddy® Armor

nVent CADDY Hammer-On Flange Clip, 1/8 to 1/4 in Flange Thickness, Bottom Mounting, 25/75/100 lb Load, For Use With: Universal Clamp, Conduit Clip and Structural Beam/Purlin, Specifications: 1/4 in Rod, Spring Steel, Caddy® Armor

nVent CADDY M24S Hammer-On Flange Clip With Stud, 1/8 to 1/4 in THK Flange, 25/75/100 lb Load, Spring Steel, Caddy® Armor

nVent CADDY M58S Hammer-On Flange Clip With Stud, 5/16 to 1/2 in THK Flange, 25/75/100 lb Load, Spring Steel, Caddy® Armor

nVent CADDY Cable/Conduit to Wire Clip, 25 lb Load, 0.45 to 0.6 in OD, 14/4 to 10/3 AWG, 12 to 8 AWG Wire, For Use With: MC/AC Cable, Spring Steel, Caddy® Armor

nVent CADDY H-Frame Post Base, 750 lb Static, 4.6 in Thickness, Foam/Polyethylene/Polypropylene/Steel, Hot Dipped Galvanized, 12.375 in L x 12.375 in W x 4.6 in H, -30 to 130 deg F

nVent CADDY Purlin Clamp, 1/4 in Rod Diameter, 200 lb Static Load, 1/4 in Flange, Specifications: 30 in-lb Torque, Steel, Electro-Galvanized

nVent CADDY Purlin Clamp, 3/8 in Rod Diameter, 200 lb Static Load, 1/4 in Flange, Specifications: 30 in-lb Torque, Steel, Electro-Galvanized

nVent CADDY Pipe and Conduit Support, 1/2 x 3 in, 3/4 x 2 in, 1 x 1 in Pipe, 25 lb Load, Plastic, 4-7/16 in H x 4-11/16 in W x 5-11/16 in D Dimensions, Domestic

nVent CADDY Strut Support, Adjustable, 12-1/2 in Length, 8 in Width, 6 to13 in Thickness, For Use With: Pyramid ST Rooftop System, Pipe, Conduit, Duct and Cable Tray, Polyethylene/Polypropylene/Steel, Hot Dipped Galvanized

nVent CADDY Strut Support, Fixed, 12-1/2 in Length, 8 in Width, 4.8 in Thickness, For Use With: Pyramid ST Rooftop System, Pipe, Conduit, Duct, Cable Tray and Equipment, Polyethylene/Polypropylene/Steel, Hot Dipped Galvanized